Downloads
The ready-made capillary tube mat which is clicked into a perforated insert foil. Due to the protected position of the capillaries in the foil the FOLIMAT can be walked on without any risk of damage even before the floor covering is placed or laid.
This capillary tube mat is predestined for filling on flat surfaces in floor, wall and ceiling areas. The FOLIMAT is particularly often used for underfloor heating systems and can be laid directly on a load-bearing substrate of screed, wood or dry construction elements. As a thin-layer underfloor heating a construction height of only 8-10 mm is already sufficient. This makes it excellently suitable for renovation.
FOLIMAT heating and cooling mat FSB 20.00 | 20.11 | 20.20 | 20.02
| FSB 20.00 | |
|---|---|
| with open mat distributor pipes for welding |
|
 |
capillary tube mat in perforated foil insert  |
push-lock connections
| Designation | FSB 20.00 | FSB 20.11 | FSB 20.20 | FSB 20.02 |
|---|---|---|---|---|
| Description | with open mat distributor pipes |
with 2 |
with 2 push-lock-connections on the left |
with 2 |
| Pictogram |  |
 |
 |
 |
field of application
- floor|onto cement screed or floating screed
- floor|onto wooden or dry screed subfloors
- ceiling and wall|for gluing to and afterwards filling on load-bearing substrates
technical data
| MATERIAL/COLOUR | mat distributor pipe and capillary tube: Polypropylene (PP-R) recyclable/blue; insert foil: Polystyrene/black |
| MAT DISTRIBUTOR PIPE | 20 x 2,0 mm, round |
| CAPILLARY TUBE MAT | 4,3 x 0,8 mm |
| DISTANCE A | 20 mm |
| LENGTH L | 600‐6000 mm in 10-mm steps |
| WIDTH B | 300 mm/600 mm |
| CONNECTION TYPE | with open mat distributor pipes/with 2 push-lock-connections 10 mm or 15 mm |
| SPECIFIC WEIGHT | approx. 700 g/m² capillary tube surface |
| SPECIFIC VOLUME OF WATER | 0,320 l/m² capillary tube surface |
| SPECIFIC TOTAL WEIGHT | approx. 1020 g/m² capillary tube surface |
| PRESSURE STAGE | PN 10 |
| MAX. RECOMMENDED OPERATING PRESSURE | 4 bar |
| MAX. ALLOWED HEATING TEMPERATURE | 60 °C |